How to remove glass glue from glass

In normal life, a lot of people must have encountered such a situation. When using glass Glue, it is always difficult to remove it when it is used. The following Xiao Bian will introduce the use of glass glue and how to remove the glass glue everywhere.

How to use glass glue

1. Use: One-component Silicone glass glue can be used immediately, it can be easily shot from the glue bottle with a glue gun, and the surface can be trimmed with a spatula or wood chip.

2. Sticking time: The curing process of Silicone Adhesive is developed from the surface to the inside. The silicone drying time and curing time of different characteristics are different, so the repair of the surface must be performed before the glass Adhesive is dry. (Acid gel, neutral transparent plastic should generally be within 5-10 minutes, neutral noise gel should generally be within 30 minutes). If separation paper is used to cover a certain area, it must be taken before the skin is formed after the glue is applied.

3. Curing time: The curing time of glass glue increases with the increase of bond thickness. For example, 12mm thickness of acidic glass glue may take 3-4 days to solidify, but within about 24 hours, there is a 3mm outer layer has cured. When bond it to glass, metal, or most wood, it has a 20-pound/inch peel strength after 72 hours at room temperature. If the place where the glass glue is used is partially or completely closed, the curing time is determined by the tightness of the seal. In an absolutely confined place, it is possible to remain uncured forever. Increasing the temperature will make the glass glue soft. The gap between metal and metal bonding surface should not exceed 25mm. In a variety of bonding applications, including closed conditions, before using the bonded equipment, should fully check the bonding effect. During the curing process, the acidic glass adhesive produces a smell due to the volatilization of acetic acid. This taste will disappear during the curing process and will not have any odor after curing.

4. Bonding: A. Wipe the metal and plastic surfaces completely to remove oil. Then, except that the plastic is first rinsed with acetone, the rubber surface is sanded and then wiped with acetone. Observe the precautions for using this solvent when using acetone. B. Spread the glass glue evenly on the surface of the object. If it is to bond the two surfaces together, you can put one side first to find the position, and then use enough force to squeeze the other side to squeeze out the air. Do not squeeze the glass glue. C. Place the bonded device at room temperature until the glass glue is cured.

5. Sealing: When the silicone glass adhesive is used for sealing, it is also performed according to the above several steps. The glass adhesive is forced into the joint surface or gap so that the glass adhesive is in full contact with the surface.

6. Cleaning: The glass glue is removed according to whether the glass glue has been cured or not. The following small series will give you a detailed introduction to the removal of glass glue.

Glass glue removal method

The glass glue is removed according to whether the glass glue has been solidified or not to choose different methods:

1. Uncured glass glue: Before the glass glue is not cured, it can be easily removed. When the glass glue is not cured, whether it is stuck on the human body, utensils or clothing, it can be easily removed by washing with water, so uncured glass glue is the easiest to clean.

2. Cured glass adhesive: If the glass adhesive has been cured, removal is difficult. According to the glass adhesive cured in different parts, the removal method is:

(1) Remove the glass glue on the hand: After the glass glue is solidified, it is not sticky, so you can remove it with you hands;

(2) Remove the glass glue on the floor: The glass glue on the floor depends on the floor, choose different methods. If it is a tiled floor, it is generally easy to remove it. Use a knife to slowly cut the cured glass glue. If it is a wooden floor tile, soak the sponge into the boiling water to dip into the heat, throw the water off and dry it slightly, and wipe it several times repeatedly. The glass glue will wipe off spontaneously.

(3) Remove the glass glue from the glass: The glass glue on the glass can be scratched with a knife and gently scraped off with a knife at the place where there is glass glue on the window. This is easy to scrape. Can also be considered with xylene, acetone and other solvents scrub. Like glass glue curing attached to metal and other items, but it also can be removed in the same way.

(4) Remove the glass glue on the clothes: If it is attached to the clothes, you can consider using a brush to brush it. If you still cannot remove the glass glue, you should consider the banana water.

How to remove glass glue

1.It is relatively simple to remove the glass glue on the hand. Generally, the glass glue does not stick to the hand, and the cured glass glue can be removed. In the simplest case, twist the hands repeatedly to remove it. If there is more glass glue that sticks to your hands and it is difficult to remove, consider using alcohol, or remove with gasoline.

2. Alcohol: Alcohol is an organic solvent and its solubility is not very good. It dissolves slowly and dissolves less. In this dissolution process, the glass glue can be removed. This is mainly due to the organic polymer chains of the alcohol-cut glass glue, which breaks down the polymer organic compounds. In fact, physical effects are achieved through chemical forces. In addition, alcohol is generally used for disinfection and it is not harmful to the skin. It is suitable for the removal of glass glue on small areas of skin.

3, knife scraping: If more glass glue stick to your hand, you can use a relatively blunt knife scrape the glass glue, scrape the glass glue, but when using a knife, pay attention to safety, so as not to scratch the skin.

4, organic solvents: acetone, xylene, gasoline, etc. can also remove the glass glue, glass glue is the main component of silicone, it can be dissolved by these organic solvents.

5, detergent: paper wipe the big glass of plastic on the hand, and then add a little water with alkaline or detergent, then rub it repeatedly.

6, hot water immersion: If the glass glue is dry and difficult to remove, you can use hot water bubble, sweating hands, squat, can also remove the glass glue from the hand.

How to Remove Glass Gum on Tiles

When the home is being renovated or it is necessary to use glue glass on some part of the home, it is often easy to accidentally drop the glass glue onto the tiled floor. It is also effective to scrape off the cured glass glue with a utility knife, but be careful to scrape the tiles. In addition, you can gently wipe the tiles with a warm towel to clean glass glue, too.

1, for the uncured glass glue, the treatment is relatively easy, just spray some cleaning agent noto it, wait a few minutes and then wipe it.

2, if it is already cured glass glue, with a single-sided blade or utility knife, gently scraping it. Be very careful when using it, otherwise it will easily scratch the glazed tile and affecting the appearance of the tile.

3, wet towel wipe: In the treatment is almost the same, use a wet towel to rub it, this will not damage the ceramic glaze and will not destroy the appearance of the brick surface.

4, organic solvents: If it is very difficult to remove the glass glue, or it has been stuck for a long time , you can use some organic solvents, such as alcohol, gasoline, etc to remove the glass glue.

Xiao Bian concludes: The use of glass glue and the removal method of glass glue are introduced here, and we hope to help everyone. If you want to know more related information, you can pay attention to this website information.