Medium Grade Acid Gasket Maker

Item:MPB106

Specifiction:110g/pc,12pcs/inner,12inners/cts

Meas:45.3*29*63.8cm

Feature:
This product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in the air rapidly. Convenient operation, perfect performance of high or low temperature resistant, several machine waste water resistant, good elastic. Have colors of clear, black, red.

Main Component:
αω-Dihydroxyl Methyl Silocone

Scope of application:
This product is for gear case, fore-and-art board, water pump of car, auto bike, plane flange, cover board of other machine equipment.

Using Method:
1. Thoroughly clean the surface, degrease oil and dirt.
2. Remove the cap, puncture the cap mouth, put on the spray nozzle, cut bevel to the size which needs.
3. Do not stop during operation, after operate for 10 minutes, reassemble the parts.

Warning:
1.The working conditions should maintain ventilate
2.If the cleaned surface exposes in the rain water or the contamination, also must clean again.
1. Before solidification avoids the eye contact, if touches the eye carelessly, use massive clear water wash, serious contact go to see a doctor, if contacts the skin, use the cloth or the paper goods to wipe out.
2. When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble , affects the seal effect.
5. After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth..
6. Do not put into mouth and keep out reach of kids.

Storage and packing:
1. This product is non-flammable, keep in 10-27℃ cool dry place seal storage, valid for 9 months from date of production.
2. Packing：110g/pc. 70g/pcin plastic tube.